Choosing the Right Vaporizer Coil Head
The main factors to consider when considering the different options for a Vape Coil are the wire type, resistance, and even the shape or style of your coil. All of these elements are combined in a single coil to give it its own distinct character and affect its ability to ramp-up or vaporize, taste, vapor output, and even coil compatibility (i.e. DTL or MDT). I will describe each of these components to help you choose the best Vaping Coil.
Resistance is usually measured in ohms, which is the amount of force that is required to pull the wire back to its original state. Higher resistance means that you will have to pull harder on the wire to get it to go back. Higher ohm load will give you more vapor per wick. However, lower resistance will result in less vapor per coil and vice versa.
Ohm load refers to the level of resistance, which determines the voltage drop across the wire. Higher the ohm load, higher the voltage drop across the wire. Low resistance will result in less power used to produce a given wattage, but it also means it will take more power to heat up the coils and cause them to heat up. Therefore, low ohm coils are ideal for low wattage vapes and coils for high wattage vapes.
I usually recommend picking out the highest resistance possible because this will allow you to flavor your juice better. On the other hand, some people will choose low ohm coils for their highest wattage rating because the juice flavours they prefer tend to have a higher flavour threshold than the typical vaper. Some people prefer a smooth, mellow flavour over fruit flavours. In this case, they can get by with a lower wattage e-liquid if they can still take care of the flavour aspects of their recipe.
The lifespan of your coils will be affected by how you maintain your e-juice. If you leave your coils out, uninstalled, overnight or for lengthy periods of time, you can dramatically shorten their lifespan. There is no reason to over-use your coils, so make sure you use them correctly and only leave them plugged in when you’re ready to refill them.
You should always take into account the building difficulty of your mtl vaping build. The mtl vaping process is fairly simple for a newbie to understand. Your starting point should be a clean bowl with a small amount of water in it. You’ll need to build your coils around the water in a manner that allows you to create a wick that is both thin and strong. The reason this is important is to ensure that the coil burns completely away. In addition to this, the more coils you use, the less likely you’ll have to rebuild the coil on a timely basis.
The coil you use, which is also known as the wick, will be made of cotton or ceramic. A good rule of thumb is to avoid using any other materials for your ceramic coils other than the one used to create the mike and ceramic head. When selecting a material, try to avoid the use of glass, foil, rubber and metal. All of these materials will eventually burn and cause damage to your coils. Instead, stick to materials such as nylon, cotton and ceramic.
The final aspect you should consider is the resistance. Resistance simply refers to the gauge of resistance that the mine will produce. The higher the resistance of your coil, the higher the vapor production will be. However, it is important to note that this is purely a factor of personal preference. Some mikes will produce a higher resistance than others, while others will produce a lower resistance. This factor will come into play most heavily, when choosing between a mild or strong throaty flavor.