uwell vape caliburn pod Nunchaku amulet watch crown 4 tank review

Well I received a caliburn pod the purposes of this review.

Well nunchaku is available in several colors:

– Green Metallic

– iridescent

– Purple

– Black and Gold

– The corrosion of iron

– Black Full

– Sapphire Blue

Description and features:

– Size: 27.4 mm x 94.5 mm

– Material: Stainless Steel

– Power range: 5-80W

– Resistance range: 0.1 ~ 3 ohms (VW), 0.1 ~ 1 ohm (TC), 0.1 ~ 0.5ohm (manual)

– Temperature range: 100 ~ 300 ° C / 200 ~ 600’F

– A new generation of E-cigarette panel Well Control, making boxes mod tube insurance

– Operating mode: the power mode, the mode TC (NI, SS), the bypass mode

– Battery 18650

– Ergonomic design felt perfectly at hand

– Pocket size when traveling

– simple interaction system

– Micro USB port for charging

In the frame:

– mod nunchaku

– USB Cable

– Warning Card

– User’s Guide

Well Nunchaku vape tube is fixed, powered by a battery and 18650 can operate up to 80W. In the widest part of the diameter 27.4MM mod is the height of the model is 94.5mm, but on top of the diameter is 25 mm mod. Nunchaku is not a big tube mod mod in my opinion, it has the perfect dimensions and mod is very comfortable to wear, feels good in the hand because of the way. Nunchaku are made of stainless steel and feels very solid, the build quality is excellent and I can not complain about anything here. color quality so far looks good so I do not see scratches on the mod mod and I use that a lot. You can buy this model in several different colors, 7 colors, black. In the MoD, you can see the details, from the top of the mod, you can see sculptures in the tube that you can see engraved “nunchaku Well”. At the top of the battery, you can see some details that help in removing the battery cover and at the bottom you can see engraved “Well Designed by”, “www.myuwell.com” and you can see the stars recorded. Personally, I think the beautiful mod, but this is very subjective.

From the top of mod, no connection with stainless steel spring loaded pin plating and thread here either. As have been said above a diameter of 25 mm, can be used here sprayers anything up to 25 mm without false.

Sub mod, you can see the battery cover, the battery cover also has a good thread and can tighten or loosen the mod smoothly. In the battery cover, you can see four vents. A getting out of the battery cover, it may be reduced pin and spring pin. Inside, there is a more mod pin and you can see very clearly marked with the red, so you know how to put on your battery. No it isolation mode, in which case the battery is used stripes, but do not use the battery if you notice any scratches on the battery.

In the tube, you can see the shutter button, the plus and minus buttons USB port and you can see the screen.

Here hold the fire button and it’s not hard to find in a mod when vape like, shutter button has several sculptures that can be felt under your finger. shutter button works fine, I have no problem with the shutter button it is very sensitive and dislocation. More and less boots work fine too and I have no problem, but when mod can stir here some keys rattle.

In the tube there is a USB port lets you charge your batteries in a mod, but as usual, we recommend using an external charger to charge the battery.

Basically, there is a very bright screen and the screen, you can see everything on the screen is very clear.

To activate the mod must click 5 times on the shutter button, the same is when you want to disable the mod. When the Ministry of Defense lights shown “Well Hello” on screen and after that if the power mode of the device is used on the screen, you will see:

– Power

– The battery indicator

– coil resistance

– Volt

If you use the device in temperature control mode, appears on the screen:

– Temperature

– The battery indicator

– coil resistance

– Power

To enter the menu you must click 3 times on the shutter button, the menu can be seen:

– Supply Mode

– Temperature Ni Mode

– Temperature Mode Ss

– Bypass Mode

– Return to factory settings

– Exit the menu

Mod work Crown Pod of 5-80watts when the key roughly 0.5W watts is pressed up or down, and 80W power when the plus button and the return to 5W is pressed when the power is on and press the button 5W reduced, go to 80W.

You can lock mod really, all you have to do is press the shutter button and the minus button, you will not be able to use the mod at all until you open it with keys and reducing fire. You can also block only plus and minus buttons, for this you need to press the shutter button and a button, so you can vape but you can not adjust the power until the device is opened.

It has some data. I ran the normal tests. resistance tests made at 0.11, 0.16, 0.2 and 0.52 ohms. Watt max points (80), 60, 40 and 20. 0.11 ohm reached the maximum at 79 watts and 27 amps. For the remainder of the test within 2 watts or 0.16 point A, the limit of 80 watts is achieved. It has never been more than two, the rest of the way. 0.2 Test for Maximized to 80 watts. the rest is never out of more than 0.52 2. For the tests reaches the limit of 82 watts and 6522 volts. The rest of the test has never been out of more than 2 watts. Volt shows that there is an amplification circuit in this mod.

Overall I am very impressed with the performance of this mod. There are 16 test points, each RAN 5 times for a total of 80 trials, of these 80, 45 are in point 25 is only 2 watts off, and 10 only 1 watt off. At no point and time that the model is no more than that. They volts limit the list to 7, I will be required to use greater force to do this because I limited by a 6522 watt but show the possibilities and prove that mod has the drive circuit. Limit amplifier had me 27 years, but again could be as high as I need less resistance to be less. I consider this mod is considered very accurate and really gives its full 80 watts all the way from 0.11 to 0.52 ohms minimum resistance, so I’m pretty impressed.

mod very good performance. Accurately assessed. The impressive accuracy, most of the dead time and the worst in watts or 2 parameters. A total of 80 watts available for minimal resistance from .11 to .52. 6.522+ yes working voltage boost circuit like most mods individual batteries

Using wire SS SS316 with the default mode (no mode or adjusting TCR), I tested four build another series of spaced, round double spaced, and winding only two luxury. Without adjusting the power of this mod mode temperature control, it is still 60 watts. Overall mod doens’t good performance in controlling the temperature of all. Caliburn Vape hardly at all until you go to 500F. This brings me to go all the way to a hot 580F decent vaporizer. Even maximum 600F, still is almost vaporizer hot. There is a dry shot away but that was the only good thing I can say respect. It also accelerates back a little more difficult than expected. You can never get a vaporizer without problems in controlling the temperature gets there.

This mod uses a body mods rare tube style not seen in today’s game. I think it will be the main attraction of these devices. 25 mm can be handled without false atomizers (25.2mm wide platform 510 to match the nunchaku tank). Thread the large battery cover. To install the batteries simply unscrew the cover of the lower part has knurling to grip it and pull the battery and the back of the cap screw. model itself is built solid. There is a small squeaker button plus and minus buttons, none the shutter button. It has a small screen on the front showing strength, battery level, power settings and love tensions. In voltage mode is the climate retired life in exchange for control of the temperature. shutter button is shaped like an Allen wrench and dislocation nice. 510 seems to be pretty good. I do not take apart, but atomizers 5Up and did not give me a problem and everyone nods to the flush. Absolutely comments anecdotes battery life on the blog, with VTC5A battery is fully charged, 45W, I uwell amulet vape watch reservoir crown 4 tank

single use only. 5 clicks to activate or deactivate. 3 Click to access the menu and the up and down to navigate. Very easy to use. There is also a reset option bypass mode and factory.

MOD

the entire first mod is a very good shape and feels great in hand and if you ask me it is very convenient to use, it’s hard not to find the shutter button, as is and engraving, which is a additional advantage. I like the size of a mod, mod height of only 94.5mm, which is a big plus for me, because in combination with most sprayers will be very pleasant due to the high that I can take with me all mod. Mod has a very interesting feature, I can lock the device, in fact, I love it because there is no possibility that can be activated in the pocket, is really not a problem to switch off the device before putting it in a pocket, but it was good we had a key choice.

This model is powered by a 18650 battery and can not use other batteries here, not only can use air battery of this mod 20700.

This device works great, the fries were good and I did’t have problems, so far so good. I use the camera low power and high strength and can not complain, it works as it should. Atomizers in a suit 24mm or 25mm diameter well in the Ministry of Defense, of course, you can also use smaller sprayers with beauty rings.

build quality as I said very good, a good thread on top and that I will not be a problem when you want to put the battery in the mod. shutter button and the plus and minus buttons run smoothly.

Basically it is a very simple model to use, you can choose from four modes, so there’s nothing complicated here and you can customize almost everything quickly.

I recommend this mod for those who like to use them a tube mods, I think it is a very good mod and works as expected without problems so far.

Drawbacks:

– Can not use a 20700 battery

Pro:

– The build quality is good

– Very comfortable to use

– Mod simple, use

– good appearance (subjective)

– Good Button

– The screen is bright

– Chip works well

– The colors look good

You can get it here: uwell vape https://www.vapeciga.com/collections/uwell

Well I received a caliburn pod the purposes of this review.

Well nunchaku is available in several colors:

– Green Metallic

– iridescent

– Purple

– Black and Gold

– The corrosion of iron

– Black Full

– Sapphire Blue

Description and features:

– Size: 27.4 mm x 94.5 mm

– Material: Stainless Steel

– Power range: 5-80W

– Resistance range: 0.1 ~ 3 ohms (VW), 0.1 ~ 1 ohm (TC), 0.1 ~ 0.5ohm (manual)

– Temperature range: 100 ~ 300 ° C / 200 ~ 600’F

– A new generation of E-cigarette panel Well Control, making boxes mod tube insurance

– Operating mode: the power mode, the mode TC (NI, SS), the bypass mode

– Battery 18650

– Ergonomic design felt perfectly at hand

– Pocket size when traveling

– simple interaction system

– Micro USB port for charging

In the frame:

– mod nunchaku

– USB Cable

– Warning Card

– User’s Guide

Well Nunchaku vape tube is fixed, powered by a battery and 18650 can operate up to 80W. In the widest part of the diameter 27.4MM mod is the height of the model is 94.5mm, but on top of the diameter is 25 mm mod. Nunchaku is not a big tube mod mod in my opinion, it has the perfect dimensions and mod is very comfortable to wear, feels good in the hand because of the way. Nunchaku are made of stainless steel and feels very solid, the build quality is excellent and I can not complain about anything here. color quality so far looks good so I do not see scratches on the mod mod and I use that a lot. You can buy this model in several different colors, 7 colors, black. In the MoD, you can see the details, from the top of the mod, you can see sculptures in the tube that you can see engraved “nunchaku Well”. At the top of the battery, you can see some details that help in removing the battery cover and at the bottom you can see engraved “Well Designed by”, “www.myuwell.com” and you can see the stars recorded. Personally, I think the beautiful mod, but this is very subjective.

From the top of mod, no connection with stainless steel spring loaded pin plating and thread here either. As have been said above a diameter of 25 mm, can be used here sprayers anything up to 25 mm without false.

Sub mod, you can see the battery cover, the battery cover also has a good thread and can tighten or loosen the mod smoothly. In the battery cover, you can see four vents. A getting out of the battery cover, it may be reduced pin and spring pin. Inside, there is a more mod pin and you can see very clearly marked with the red, so you know how to put on your battery. No it isolation mode, in which case the battery is used stripes, but do not use the battery if you notice any scratches on the battery.

In the tube, you can see the shutter button, the plus and minus buttons USB port and you can see the screen.

Here hold the fire button and it’s not hard to find in a mod when vape like, shutter button has several sculptures that can be felt under your finger. shutter button works fine, I have no problem with the shutter button it is very sensitive and dislocation. More and less boots work fine too and I have no problem, but when mod can stir here some keys rattle.

In the tube there is a USB port lets you charge your batteries in a mod, but as usual, we recommend using an external charger to charge the battery.

Basically, there is a very bright screen and the screen, you can see everything on the screen is very clear.

To activate the mod must click 5 times on the shutter button, the same is when you want to disable the mod. When the Ministry of Defense lights shown “Well Hello” on screen and after that if the power mode of the device is used on the screen, you will see:

– Power

– The battery indicator

– coil resistance

– Volt

If you use the device in temperature control mode, appears on the screen:

– Temperature

– The battery indicator

– coil resistance

– Power

To enter the menu you must click 3 times on the shutter button, the menu can be seen:

– Supply Mode

– Temperature Ni Mode

– Temperature Mode Ss

– Bypass Mode

– Return to factory settings

– Exit the menu

Mod work Crown Pod of 5-80watts when the key roughly 0.5W watts is pressed up or down, and 80W power when the plus button and the return to 5W is pressed when the power is on and press the button 5W reduced, go to 80W.

You can lock mod really, all you have to do is press the shutter button and the minus button, you will not be able to use the mod at all until you open it with keys and reducing fire. You can also block only plus and minus buttons, for this you need to press the shutter button and a button, so you can vape but you can not adjust the power until the device is opened.

It has some data. I ran the normal tests. resistance tests made at 0.11, 0.16, 0.2 and 0.52 ohms. Watt max points (80), 60, 40 and 20. 0.11 ohm reached the maximum at 79 watts and 27 amps. For the remainder of the test within 2 watts or 0.16 point A, the limit of 80 watts is achieved. It has never been more than two, the rest of the way. 0.2 Test for Maximized to 80 watts. the rest is never out of more than 0.52 2. For the tests reaches the limit of 82 watts and 6522 volts. The rest of the test has never been out of more than 2 watts. Volt shows that there is an amplification circuit in this mod.

Overall I am very impressed with the performance of this mod. There are 16 test points, each RAN 5 times for a total of 80 trials, of these 80, 45 are in point 25 is only 2 watts off, and 10 only 1 watt off. At no point and time that the model is no more than that. They volts limit the list to 7, I will be required to use greater force to do this because I limited by a 6522 watt but show the possibilities and prove that mod has the drive circuit. Limit amplifier had me 27 years, but again could be as high as I need less resistance to be less. I consider this mod is considered very accurate and really gives its full 80 watts all the way from 0.11 to 0.52 ohms minimum resistance, so I’m pretty impressed.

mod very good performance. Accurately assessed. The impressive accuracy, most of the dead time and the worst in watts or 2 parameters. A total of 80 watts available for minimal resistance from .11 to .52. 6.522+ yes working voltage boost circuit like most mods individual batteries

Using wire SS SS316 with the default mode (no mode or adjusting TCR), I tested four build another series of spaced, round double spaced, and winding only two luxury. Without adjusting the power of this mod mode temperature control, it is still 60 watts. Overall mod doens’t good performance in controlling the temperature of all. Caliburn Vape hardly at all until you go to 500F. This brings me to go all the way to a hot 580F decent vaporizer. Even maximum 600F, still is almost vaporizer hot. There is a dry shot away but that was the only good thing I can say respect. It also accelerates back a little more difficult than expected. You can never get a vaporizer without problems in controlling the temperature gets there.

This mod uses a body mods rare tube style not seen in today’s game. I think it will be the main attraction of these devices. 25 mm can be handled without false atomizers (25.2mm wide platform 510 to match the nunchaku tank). Thread the large battery cover. To install the batteries simply unscrew the cover of the lower part has knurling to grip it and pull the battery and the back of the cap screw. model itself is built solid. There is a small squeaker button plus and minus buttons, none the shutter button. It has a small screen on the front showing strength, battery level, power settings and love tensions. In voltage mode is the climate retired life in exchange for control of the temperature. shutter button is shaped like an Allen wrench and dislocation nice. 510 seems to be pretty good. I do not take apart, but atomizers 5Up and did not give me a problem and everyone nods to the flush. Absolutely comments anecdotes battery life on the blog, with VTC5A battery is fully charged, 45W, I uwell amulet vape watch reservoir crown 4 tank

single use only. 5 clicks to activate or deactivate. 3 Click to access the menu and the up and down to navigate. Very easy to use. There is also a reset option bypass mode and factory.

MOD

the entire first mod is a very good shape and feels great in hand and if you ask me it is very convenient to use, it’s hard not to find the shutter button, as is and engraving, which is a additional advantage. I like the size of a mod, mod height of only 94.5mm, which is a big plus for me, because in combination with most sprayers will be very pleasant due to the high that I can take with me all mod. Mod has a very interesting feature, I can lock the device, in fact, I love it because there is no possibility that can be activated in the pocket, is really not a problem to switch off the device before putting it in a pocket, but it was good we had a key choice.

This model is powered by a 18650 battery and can not use other batteries here, not only can use air battery of this mod 20700.

This device works great, the fries were good and I did’t have problems, so far so good. I use the camera low power and high strength and can not complain, it works as it should. Atomizers in a suit 24mm or 25mm diameter well in the Ministry of Defense, of course, you can also use smaller sprayers with beauty rings.

build quality as I said very good, a good thread on top and that I will not be a problem when you want to put the battery in the mod. shutter button and the plus and minus buttons run smoothly.

Basically it is a very simple model to use, you can choose from four modes, so there’s nothing complicated here and you can customize almost everything quickly.

I recommend this mod for those who like to use them a tube mods, I think it is a very good mod and works as expected without problems so far.

Drawbacks:

– Can not use a 20700 battery

Pro:

– The build quality is good

– Very comfortable to use

– Mod simple, use

– good appearance (subjective)

– Good Button

– The screen is bright

– Chip works well

– The colors look good

You can get it here: uwell vape https://www.vapeciga.com/collections/uwell

Leave a Reply

Your email address will not be published. Required fields are marked *