68% of smokers are willing to use Vape

A non-independent study conducted by Philip Morris International showed that, compared with 62% in Brazil and 66% in Hong Kong, only 43% of Australian smokers surveyed by tobacco companies believed that they had all the information they needed to comfortably switch to Vape.

Lead researcher Povaddo surveyed 16,099 smokers and non-smokers in 13 countries, including Australia, and found that many of them would consider switching from smoking to smoking. Globally, 68% of smoking participants stated that they are more likely to switch if they can obtain reliable information that points out the differences between the various available products.

The Australian cohort of the survey consisted of 1,238 respondents, of which 11% were current smokers and 4% were occasional smokers. The data compiled from this cohort shows that providing such information would be very beneficial by timesvape.

In Australia, public health experts and Liberal Party MPs have been working hard to overturn the current Vape ban. In Australia, these devices are legal, but the use of nicotine-containing refills is not the case.

In August 2016, some public health activists, among them the New Nicotine Alliance (NNA), submitted a proposal to the local regulatory agency Therapeutic Goods Administration (TGA) to remove nicotine concentrations below 3.6% from the poison standard. However, in February 2017, the TGA rejected the application and maintained the nicotine ban.

In September last year, the New South Wales liberal Trent Zimmerman presided over a parliamentary investigation in 2018, which was commissioned to investigate the use of Vape, and once again raised the issue of Vape’s regulations in parliament. In response, Australian Health Minister Greg Hunter finally agreed to conduct an independent investigation of the scientific evidence related to these devices. However, almost a year later, little information about the investigation was released.

Finally, in response to a question raised by Senator Cory Bernardi in the Senate earlier this month, the Australian government has released some details:

The research will be conducted by the highly acclaimed epidemiologist Professor Emily Banks and his team from the National Epidemiology and Population Health Centre of the Australian National University. Effective February 27, 2019, the grant for the project is USD 750,000, and the project is expected to be completed in December 2020.

VOOPOO Drag X VW Pod Mod Kit Review

VOOPOO Drag X VW Pod Mod Kit is ignited by an external 18650 battery, although slightly inconvenient in the battery matching requirement when compared with the last edition, VOOPOO Drag S VW Pod Mod Kit with a 2500mAh battery inside, more agreeable with those who chase after a powerful vaping. The new generation GENE.TT chip makes it reliable to start the device in 0.001s, adapt the working power to the inserted coil between 5W and 80W, recording the puffs each time you vape with the device and turn the monotonous vaping into a funny game. You can complete the 4.5ml pod with any coil in the series of the PnP, satisfying your demands whether you prefer an MTL or DL taste. It is smoothened the edges and corners and replaced by a sleek part wrapped with the leather, perfectly fitting with your gripping gesture and leaving no scratches or fingerprints on it after using a while. 7 colors optional.

Main Features:
1. Driven by the brand-new GENE.TT chip, optimize the firing time to 0.001s2. Powered by an extra 18650 battery, support re-charging via a type-c port
3. Numerous protections, escort a safe and stable vaping
4. Adjustable power up to 80W, flexible to adapt the strength of the taste your preference
5. Creative Score Ranking mode, make your vaping interesting and challenging
6. 4.5ml pod with a bottom filling design, effortless to obtain rich flavors
7. Widely compatible with all PnP coils, accessible to diverse taste experiences


Model: Drag X
Material: Alloy + leather + PCTG
Chipset: New GENE.TT
Battery: 1 x 18650 ( Not included )
Output: 5 – 80W
Output Voltage: 3.2 – 4.2V
Resistance Range: 0.1 – 3ohm
Charging: Type-C port
Charging Current: 5V / 2A
Pod Capacity: 4.5ml
Coil Resistance: PnP-VM6 0.15ohm, PnP-VM1 0.3ohm
Product Size: 3.25 x 2.8 x 9.5cm
Package Size: 11 x 8 x 6cm
Product Weight: 0.09kg
Package Weight: 0.14kg

Package Contents:

1 x Drag X Device, 1 x Drag X Replacement Pod 4.5ml, 1 x PnP-VM1 0.3ohm, 1 x PnP-VM6 0.15ohm, 1 x Type-C Cable, 1 x User Manual, 1 x Warranty Card, 1 x Chip Card

VOOPOO Drag Mini TC Mod Kit Review

The VOOPOO Drag mini TC mod kit consists of a Drag mini mod and a Uforce T2 tank. Powered by the built-in 4400mAh battery, Voopoo Drag mini TC mod kit supports a powerful output of 117W. The Drag mini mod adopts GENE.FIT chip, bringing both security and convenience to vapers. The Uforce T2 tank is an innovative sub-ohm tank empowered with strong clouds and an optional flavor. Just get the Voopoo Drag mini kit and enjoy an out-of-this-world vaping.

Main Features:
1. Resin panel with textured touch feeling and strong stability, distinctive and eye-catching
2. Integrated 4400mAh battery with 117W max output, support re-charging by a micro USB port
3. Numerous protections, ensure a safe and smooth vaping
4. Wide TC range, easy to adapt the new device to your vaping preference
5. 5ml capacity, perform well in prolonging the continuity
6. Top filling design, manageable and leakproof
7. Adjustable bottom airflow system, available for massive cloud and intense flavor

Model: Drag Mini

DRAG Mini Mod
Material: Zinc alloy, resin, stainless steel
Battery: Built-in 4400mAh
Power range: 5-117W
Temperature Range: 100 – 315 / 200 – 600 ??H
Resting Current: ?? 10|?芍 A
Output Voltage: 0 – 7.5V
Output Current: 0 – 30A
Resistance Range: 0.05 – 5ohm

Diameter: 28mm
Capacity: 5ml
UFORCE P2: Single mesh coil ( 0.6ohm, 24 – 28W)
UFORCE N1: Single mesh coil ( 0.13ohm, 50 – 100W / best at 70 – 80W )
Thread: 510

Product Size: 4.85 x 2.55 x 13.6cm
Package Size: 5.85 x 3.55 x 14.6cm
Product Weight: 0.243kg
Package Weight: 0.253kg

Package Contents:
1 x DRAG Mini Mod, 1 x UFORCE T2 Tank, 1 x UFORCE P2( Pre-installed ), 1 x UFORCE N1, 1 x 3.5ml Glass Tube, 7 x Sealing O-ring, 1 x USB Cable, 1 x GENE Chip Card, 2 x User Manual, 1 x Warranty Card

VOOPOO Drag Mini TC Mod Kit Colors Available
VOOPOO Drag Mini TC Mod Kit Specification
VOOPOO Drag Mini TC Mod Kit Core Description
VOOPOO Drag Mini TC Mod Kit Seven Security Protections
VOOPOO Drag Mini TC Mod Kit Gene.FIT Chip Inside
VOOPOO Drag Mini TC Mod Kit Package Includes

Uwell Crown 4 IV Tank Review

As we known, Crown series always the star of Uwell. Now Uwell is introducing a new member of Crown family- Crown 4 / IV tank. Crown 4 tank comes with a stainless steel construction, which makes it durable and gorgeous. The tank adopts a bubble pyrex glass tube to hold 6ml large capacity of e-juice. With advanced patented self-cleaning technology, the tank can absorb the e-juice in the condensation holder through regular usage and vaporize it. Crown 4 tank utilizes Dual SS904L coil and Double helix mesh coil to achieve heating evenly and produce excellent flavor. The SS904L is more wearproof than SS316L and has better corrosion resistance. The tank features top filling design and bottom adjustable airflow system, you could enjoy easier filling method and smooth airflow.

Main Features:
1. Innovative patented self-cleaning techonlogy, no leakage
2. SS & Pyrex Glass construction, durable and gorgeous
3. Compatible with Dual SS904L coil and Double helix mesh coil
4. Dual SS904L coil brings better corrosion resistance
5. Mesh coil heats evenly, produce excellent flavor
6. Top filling design, easier to refilling
7. Adjustable bottom airflow system

1 x Crown IV Tank
1 x Extra glass
1 x 0.4ohm coil(pre-installed)
1 x 0.2ohm coil
1 x pack of replacement O-rings
1 x User manual
1 x Drip tip cover

Uwell Crown 4 IV Tank - 6ml5ml
6 colors of Uwell Crown 4 IV Tank - 6ml5ml
Components of Uwell Crown 4 IV Tank - 6ml5ml
Specifition of Uwell Crown 4 IV Tank - 6ml5ml
Uwell Crown 4 IV Tank - 6ml5ml
Uwell Crown 4 IV Tank - 6ml5ml
Uwell Crown 4 IV Tank - 6ml5ml

Steam Crave Aromamizer Plus Review

Steam Crave Aromamizer Plus V2 RDTA, compatible with a 6mm chimney reducer and expandable to 16ml, perfectly makes up for the deficiency of poor Liquid capacity in the traditional RDTA series. Scan widely, the bottom airflow system consists of more than 3 stomatal modules varying in the air hole quantity and affected area, conducive to quickly adapt to this unfamiliar atomizer by customizing your favored strength of the taste and amount of the vapor. 2 types of kit and 3 colors optional.

Main Feathers:
1. Max 16ml juice capacity, super-sufficient for a continuous vaping with extra-long endurance
2. Modified adjustable bottom airflow system with 3 stomatal modules on the AFC ring, easier to fit your taste preference accurately
3. Upgraded juice flow control, keep the device on standby
4. Postless deck, simplify the assembly and disassembly of the coil
5. Mesh deck, better to balance the heating and smoothen the flavor

Brand: Steam Crave
Model: Aromamizer Plus V2
Juice Capacity: 8ml ( Basic kit ) / 16ml ( Advanced kit )
Drip Tip: 810
Diameter: 30mm
Product Size: 3 x 3 x 7.72cm
Package Size: 11 x 8 x 7cm
Product Weight: 0.08kg
Package Weight: 0.2kg

Package Contents:
Basic Kit
1 x Aromamizer Plus RDTA, 1 x Spare 8ml Glass Tank, 1 x Spare Part Bag of O-ring & Grub Screw, 1 x Allen Key, 1 x User Manual, 1 x Steamcrave Sticker

Advanced Kit
1 x Aromamizer Plus RDTA, 1 x Spare 8ml Glass Tank, 1 x 8ml Metal Extension Tank, 2 x 6mm Chimney Reducer for Glass Tank Section and Metal Tank Section, 1 x Mesh Deck Kit, 1 x Spare Part Bag of O-ring & Grub Screw, 1 x Allen Key, 1 x User Manual, 1 x Steamcrave Sticker

Steam Crave Aromamizer Plus V2 RDTA 30mm 3 Colors Optional
Steam Crave Aromamizer Plus V2 RDTA 30mm Airflow System
Steam Crave Aromamizer Plus V2 RDTA 30mm AFC Ring
Upgraded Juice Flow Control
Steam Crave Aromamizer Plus V2 RDTA 30mm Coil Deck Details
Steam Crave Aromamizer Plus V2 RDTA 30mm Coil Deck Display
6mm Chimney Reducer
8ml Metal Extension
Perfect Match With Hadron 220
The Basic Kit Include
The Advanced Kit Include

WOTOFO Profile 1.5 RDA Review

WOTOFO Profile 1.5 RDA is popular among vapers with multiple choices of the vapor and flavor. Workable with 3 types of the nexMESH coil, differing in the structure and specialized vaping effect, it is effective to widen the applicability of the new atomizer. There are 10 air holes in the side of the tank, allowing you to turn the drip tip to expose more or few spaces for a mellow or strong taste. Creative ceramic support with ridged appearance is positioned under the coil, perfecting raising the base to close to the cotton and leading the liquid to the sides of the cotton for efficient saturation. 6 colors optional.

Main Features:
1. Compatible with 3 kinds of the nexMESH coil, conducive to refine the vapor and flavor you prefer
2. Side airflow system with 3 levels of vapor adjustable, available for various taste experiences
3. Ridged ceramic base, facilitate to keep the cotton in place and absorb thuwikc
4. 2 incidental drip tips with wide core, better to enhance the immersion of vaping

Brand: Wotofo
Model: Profile 1.5
Material: Stainless steel + German peek + resin
Wattage Range: 60 – 80W
Recommended Wattage Range: 70 – 75W
Juice Feeding Method: Drip / squonk
Three nexMesh Coils: 0.15ohm nexMesh Chill A1, 0.13ohm nexMesh Turbo A1, 0.16ohm nexMesh Extreme A1
Drip Tip: 810
Diameter: 24mm
Thread: 510
Product Size: 2.4 x 2.4 x 3.31cm
Package Size: 9.6 x 7.6 x 5.1cm
Product Weight: 0.0426kg
Package Weight: 0.12kg

Package Contents:
1 x Profile 1.5 RDA, 1 x Extra Drip Tip, 1 x nexMESH CHILL A1 0.15ohm, 1 x nexMESH TURBO A1 0.13ohm, 1 x nexMESH EXTREME A1 0.16ohm, 1 x Bending Tool, 1 x Allen Key, 1 x Cross Head Screwdriver, 3 x 6mm Thick Xfiber Cotton Strip, 1 x Accessory Bag, 1 x User Manual

WOTOFO Profile 1.5 RDA 24mm
WOTOFO Profile 1.5 RDA 24mm Information
WOTOFO Profile 1.5 RDA 24mm nexMESH Coil
WOTOFO Profile 1.5 RDA 24mm Technology
WOTOFO Profile 1.5 RDA 24mm 3 Styles Of Airflow Control
WOTOFO Profile 1.5 RDA 24mm ijk Distribution
WOTOFO Profile 1.5 RDA 24mm Drip Tip
WOTOFO Profile 1.5 RDA 24mm Components
WOTOFO Profile 1.5 RDA 24mm Colors Available

Smok GX350 TC Mod Kit Review

Smok GX350 350W TC mod kit(With TFV8 Tank) carries on an impressive vaping with powerful output and super-sufficient liquid to the end. Smok GX350 350W TC Box Mod Kit installs 4 pieces of 18650 battery and it would reward you with 350W max output, multiple working modes, sensitive response speed and stable performance. The top OLED screen facilitates to inform you of specific operation data, such as the selected mode, real-time battery life, resistance and so on. The firmware upgrading function makes your order a cost-effective one, keeping the technology inside in step with the latest one currently. 3 colors optional.

Quick Links:
SMOK GX350 TC Box Mod More Details

Main Feathers:
1. Require 4 extra 18650 batteries to release up to 350W output, support your vaping with continuously strong power
2. Numerous protections, escort the safety and stability in an operation
3. Support upgrading the firmware via a micro USB port, make it never go out of style
4. 6ml juice capacity, free you from frequently adding liquid
5. Adjustable bottom airflow system with large slots, flexible in switching tastes between the intense and mild
6. Zinc alloy construction, superior in the fadeless glossiness and advanced texture

Brand: Smok
Model: GX350

Smok GX350 TC Box Mod
Material: Zinc Alloy
Battery: 4 x 18650 ( Not included )
Output Wattage: 1 – 350W
Resistance Range: 0.1 – 3.0ohm ( VW ) / 0.06 – 3.0ohm ( TC )
Standby Current: < 500uA
Temp Control Range: 200 – 600 ??H / 100 – 315
Working Mode: VW / TC ( Ni200 / Titanium / SS )
Support Upgrading Firmware: Yes
Charging: Micro USB Port

Smok TFV8 Tank
Material: Stainless steel + pyrex glass
Capacity: 6ml
Coil Resistance: V8-T8 Octuple 0.15ohm ( 50 – 260W, best at 120 – 180W )
V8-Q4 Quadruple 0.15ohm ( 50 – 180W, best at 90 – 150W )
Diameter: 24.5mm
Thread: 510

Product Size: 5.8 x 4.04 x 15.35cm
Package Size: 13 x 10 x 8cm
Product Weight: 0.322kg
Package Weight: 0.38kg

Package Contents:
1 x GX350 Mod, 1 x TFV8 Tank, 1 x V8-T8 Octuple Core, 1 x V8-Q4 Quadruple Core, 1 x Extra Glass Tank, 1 x Spare Part Pack, 1 x User Manual

For vape shops, there is finally good news from the FDA!

The US Food and Drug Administration will allow vape stores to change coils, assembly vape kits, and refill nebulizers for customers on site, even if they are not designated as tobacco product manufacturers under presumptive rules.
The federal agency has just issued guidelines for the rules, for the first time in plain English what activities are allowed in retail stores. Since the presumption regulations were announced, business owners have repeatedly tried to make clarifications.

The presumption rule was issued in May last year and became effective on August 8, 2016. According to the FDA, any retail company that “creates or modifies” newly identified “tobacco products” (including all Vape and vapor products) will be regarded as a manufacturer and needs to be registered as a manufacturer and list all the products they sell , Submit health documents to the agency, report a list of ingredients, and report harmful and potentially harmful ingredients (HPHC). steam crave In addition, manufacturers need to submit a pre-market tobacco application (PMTA) for all products they create or modify.
Many vapor retailers have explained these regulations, including prohibiting basic customer service activities such as changing coils, assembling equipment for a new Vape smoker’s kit, simple repairs, or explaining product features. The FDA has avoided specifying exactly what is allowed in several online seminars, phone calls, and emails with shop owners.
The following activities can be carried out without the vape shop being certified as a manufacturer:
· “Demonstrate or explain timesvape the use of ENDS products (Electronic Nicotine Delivery System) without assembling the product”
· “Maintain ENDS products by cleaning or tightening fixing devices (such as screws)”
· “Replace the coil in the ENDS product with the same coil (for example, the same resistance and rated power)”
· “Assemble components and parts into the final product in the ENDS kit”
In addition, the FDA  stated that it apv mods will not enforce some activities that are deemed “modified” product categories. According to its announcement, the FDA “does not intend to enforce the five requirements listed above on these vape stores, if, in general, all modifications are consistent with the FDA’s marketing authorization (MA) conditions, or the original manufacturer The specifications provided and all modifications made are consistent with these specifications.”
Examples of modifications currently allowed by the FDA include:
· “Refill an open ENDS system, if before, during and after filling, the equipment or e-liquid is not further modified beyond the FDA marketing authorization (MA) order”
·”Refill an open ENDS system, if further modifications to the equipment and e-liquid before, during and after filling are not inconsistent with the manufacturer’s specifications, if there is no MA command
In other words, they will allow the store to help customers refill the atomizer as long as they do not make any modifications to the equipment other than what the manufacturer recommends (with marketing orders or instructions).
They specifically explained that it is forbidden to replace any coils other than spare coils designed for specific atomizers. Therefore, it is not allowed to be made by shop assistants for customers. Filling closed system equipment is also prohibited smoant.
The publication of the new draft guidelines also opened a simple window for public comments. All retailers and customers of adv vape stores can make specific criticisms or suggestions about how the presumption rules affect vape store transactions.
The draft guidance closely follows the two manufacturer-related deadlines postponed by the FDA. The deadline for manufacturers to register with the agency has been postponed from December 31, 2016 to June 30, 2017. Soon after, the FDA also postponed the deadline for submitting the ingredient list from February 8 to August 8, 2017.
Finally, the agency announced in this document that it will not force all tobacco products to show “an accurate description of the percentage of foreign and domestic tobacco used in the product.” It is really comforting.

University of California investigates Vape’s smoking cessation effect

In the United States,Ijoy Vape is currently the most popular smoking cessation product, surpassing all US Food and Drug Administration (FDA) approved smoking cessation aids, including nicotine patches, chewing gum and prescription drugs. However, recently published two nationally representative longitudinal research reports show that Vape has no effect in helping adults quit smoking.

These analyses were led by researchers at the University of California, San Diego School of Medicine, who used data from the Tobacco and Healthy Population Assessment (PATH) study, a longitudinal study of tobacco liquid use and its impact on American health. The PATH study was carried out by the National Institute of Drug Abuse (NIDA) and the FDA Tobacco Products Center under the contract with Westat. Between September 2013 and December 2014, 45,971 nationally representative people were included. Adults and teenagers, and re-interview them every year.

In an analysis published online on September 2, 2020 in the journal “Public Science Library General”, researchers observed 2,770 people who smoked every day. These people tried to Quit smoking. One in four people use Vape to help them quit smoking. At the second follow-up one year later, 9.6% of Vape users had been quitting smoking in the past 12 months. But there is no evidence that there is a difference in smoking cessation rates compared with people who do not use Eleaf Vape.

The lead author of the study, Dr. John Pierce, a retired professor of cancer prevention at the University of California San Diego Moore Cancer Center, said: “Among these typical smoant American smokers who are trying to quit, we have not found evidence that Vape is helpful in quitting.” The lack of effectiveness is also evident in the subsamples who use Vape every day.”

The second analysis was published on the website of the American Journal of Epidemiology on July 27, 2020, and surveyed 2,535 daily and non-daily smokers from the PATH study. In the second year of the survey, the report stated that they tried to quit smoking in the following year. 17% of them use Vape to help quit smoking. In the follow-up survey (the 4th year of the PATH study), 13% of people reported that they had not smoked for at least 12 months-which is higher than the rate in the first analysis, because of the quit rate of people who do not smoke daily higher.

The researchers again stated that there is no evidence that smoking cessation rates are different from those who do not use Vape. However, in this analysis, it is clear that participants who use Vape to quit smoking are unlikely to be smoke-free during follow-up. This is largely because many people who have quit smoking still use Vape, which also contains nicotine.

“In these analyses, we carefully matched each smoker’s use of Vape as a stop aid up to two similar smokers who want to quit without using Vape,” said Karen Messer Group, PhD, Professor, Family Medicine and Public Health, Director of Biostatics at the Moores Cancer Center and senior author papers at the University of California, San Diego. “Our results show that these smokers can also successfully quit smoking without using TimesVape.” However, if Vape is not used, they may be more successful in breaking the dependence on nicotine. “

Teenagers no longer smoke cigarettes and use marijuana Vape

The rate of smoking among young people in the United States has dropped so fast that a national survey on drug use among young people published on the 14th showed that VOOPOO Drag X Vape and cannabis are now more common than smoking.

The New York Times reported by Jan Hoffman on the 14th that this report, funded by the Federal Government’s National Institute on Drug Abuse and administered by the University of Michigan, found that 22.9% of high school students said they had used marijuana in the past 30 days, and 16.6% of them Only 9.7% of people who have used Vape (Vaping) have smoked cigarettes.

   The subjects of this survey included 43,703 8th Hugo Vapor, 10th and 12th grade students in public and private schools nationwide. The study found that the consumption of alcohol, tobacco, prescription opioids and stimulants among teenagers has decreased or remained stable compared with last year, and is the lowest level in 20 years. In contrast, the use rate of cannabis has remained basically the same in recent years, with small changes occasionally. However, other studies have shown that the rate of cannabis use among young people has increased in the past decade.

Dr. Wilson Compton, the deputy director of the Institute, said: “All teenagers have improved their drug use and we are very impressed.” Dr. Compton continued: “We don’t know about Vape’s health issues yet. “

  Vape is a kind of atomization device that evaporates substances to facilitate inhalation. It is considered by some experts to be a healthy alternative to traditional cigarettes because they do not include carcinogens caused by burning tobacco Uwell Amulet Vape Pod System. But Dr. Compton said: “My concern is that it may represent a new way of exposure to nicotine and marijuana.”

   These devices are usually sold with nicotine, but among the 12th grade students who use Vape, 51.8% said they want to feel some taste. When asked about their use last month, one in 20 12th graders said they used marijuana Vape, and one in ten said it was just nicotine. Vape is easy to use and easy to hide. Some devices are similar to flash drives Timesvape Dreamer. Students plug in laptops for charging, making it difficult for schools to control.

   But educators and public health officials praised the decline in tobacco use. Dr. Compton pointed out that in 1996, 10.4% of eighth graders smoked every day. By 2017 Vaporesso Luxe, this number had dropped to 0.6%. In 1997, the daily smoking rate of 12th grade students reached 24.6%. By 2017, only 4.2% of people smoked every day.

   Dr. Compton believes that the decline in tobacco is due to many factors, including strong public anti-smoking campaigns, higher cigarette prices, and peer pressure. Students in all grades stated that they viewed cigarettes and alcohol as disgusting and serious health risks Dovpo Topside Dual. Experts believe that students have become more conscious of the possibility of drunken images being posted on social media, as this may damage their reputation and eligibility for college.

   But in this report, only 14.1% of 12th graders said that occasional use of marijuana poses a “significant risk”, and in 1991, 40.6% agreed with this view. In 2017 Steam Crave Aromamizer, nearly 24% of students said they had used cannabis in the past year, and this proportion has remained relatively stable in recent years.